Quality Swimming Pool Disinfection Equipment Supplier

While AQUA MP UV kills 99.9% of pathogens (bacteria, viruses) via broad-spectrum light, it's designed for supplemental disinfection. Maintain a low residual chlorine level (0.5–1ppm) to cover water in hard-to-reach areas (e.g., corners) and prevent contamination—this combo reduces chemicals by 50–70% vs. chlorine-only systems.

All AQUA sanitizers (UV, ozone, chlorine feeders) are fully compatible with saltwater pools. We use marine-grade corrosion-resistant materials (titanium, fiberglass, food-grade plastic) in key components, preventing salt-induced rust or degradation—no extra protection needed for saltwater environments.

Clean the quartz sleeve every 3–6 months: Turn off the system, disconnect power, remove the sleeve, and soak it in a 5% vinegar or specialized UV sleeve cleaner for 15–20 minutes to dissolve mineral deposits. Rinse thoroughly before reinstalling. Dirty sleeves block UV light, reducing disinfection efficiency by up to 40% and shortening lamp life.

Our MP UV line covers commercial pools from 20,000 to 100,000+ gallons, with flow rate compatibility up to 500 GPM. To choose: Calculate your pool's hourly flow rate (pool volume/4 hours) and select a model with a matching or slightly higher flow rating. For example, a 50,000-gallon pool needs a 12,500 GPH (208 GPM) UV unit—check product specs or consult our team for personalized recommendations.